Call 08048405833

Send Email

Plasma Welding Machine

Our product range includes a wide range of ewm microplasma 105-2 welding machine.
EWM Microplasma 105-2 Welding Machine
  • EWM Microplasma 105-2 Welding Machine
  • EWM Microplasma 105-2 Welding Machine

EWM Microplasma 105-2 Welding Machine

Get Latest Price

Product Brochure

Product Details:
BrandEWM
ModelMicroplasma 105-2
Setting Range For Welding Current100 A
Duty Cycle 40 Degree Celsius100 A / 60%
Open Circuit Voltage95 V
Main Voltage1 x 230 V
Main Frequency50 Hz
Tolerance-40 % up to +15 %
Recommended Generator Power7.8 kVA
Protection ClassificationIP23
Other Details:
  • Standard gas metering unit for plasma gas and shielding gas:
  • Plasma gas setting range 0.1 l/min to 0.9 l/min
  • Shielding gas setting range 1.0 l/min to 17 l/min
  • Microplasma welding machine with standard gas metering unit

Welding procedures and functions
  • Plasma and TIG welding
  • Plasma and pulsed TIG welding
  • Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc
  • Plasma and TIG welding current adjustable in 0.1 A increments
  • Pilot arc current separately adjustable for start phase, welding phase, end-crater
  • and welding break
  • Temperature, flow and pressure monitoring for the coolant circuit
  • Non-latched/latched operation
  • Spot welding/tack function (spotArc/spotmatic)
  • Adjustable up-slope and down-slope time
  • Spotmatic – reduce the time required for tacking by up to 50% (TIG only)
  • Adjustable gas pre- and post-flow time

Your benefits
  • No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works
  • Non-interchangeable connections for all mediums
  • Welding torch connection using quick connect coupling
  • Connection capability for remote control
  • Two system bus connections (e.g. for ewm Xnet)
  • All control elements and connections for welding torches, remote controls and workpiece leads are directly accessible on the front of the machine
  • Microplasma and Cool 50 MPW50, mobile with Trolly 55-6
  • No additional mains connection required for cooling unit. Power supply to the Cool 50 MPW50 via the Microplasma
  • Alternatively, at high currents, duty cycles and ambient temperatures, a separate recooling unit can be used (the recooling unit does not fit under the Microplasma or on the Trolly 55-6)
  • Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
  • 3.5 m mains supply lead with 16 A shock-proof plug
  • Always read the information in the operating instructions of the relevant welding torch and welding machine before carrying out any welding.
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Plasma Welding Machine"?
Thank youYour Enquiry has been sent successfully.
© Ms Supertech Industrial Solutions. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.