Call 08048405833

Send Email

New Items

Microplasma 105-2 Plasma Welding Machine
  • Microplasma 105-2 Plasma Welding Machine
  • Microplasma 105-2 Plasma Welding Machine

Microplasma 105-2 Plasma Welding Machine

Product Price: Rs 10.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
BrandEWM GMBH
ModelEWM Microplasma 105-2
Setting Range For Welding Current0.3A - 100A
Duty Cycle 40 Degree Celsius100A / 60%
Open Circuit Voltage95V
Main Voltage1 x 230V
Main Frequency50Hz
Tolerance-40% up to +15%
Recommended Generator Power7.8kVA
Protection ClassificationIP23
EMC ClassA
Dimensions625 x 377 x 531 mm
StandardIEC 60974-1, -3 and -10 CL.A
Other Details:
  • Standard gas metering unit for plasma gas and shielding gas:
  • Plasma gas setting range 0.1 l/min to 0.9 l/min
  • Shielding gas setting range 1.0 l/min to 17 l/min
  • Microplasma welding machine with standard gas metering unit

Welding Procedures And Functions
  • Plasma and TIG welding
  • Plasma and pulsed TIG welding
  • Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc
  • Plasma and TIG welding current adjustable in 0.1 A increments
  • Pilot arc current separately adjustable for start phase, welding phase, end-crater and welding break
  • Temperature, flow and pressure monitoring for the coolant circuit
  • Non-latched/latched operation
  • Spot welding/tack function (spotArc/spotmatic)
  • Adjustable up-slope and down-slope time
  • Spotmatic – reduce the time required for tacking by up to 50% (TIG only)
  • Adjustable gas pre- and post-flow time

Benefits:
  • No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works
  • Non-interchangeable connections for all mediums
  • Welding torch connection using quick connect coupling
  • Connection capability for remote control
  • Two system bus connections (e.g. for ewm Xnet)
  • All control elements and connections for welding torches, remote controls and workpiece leads are directly accessible on the front of the machine
  • Microplasma and Cool 50 MPW50, mobile with Trolly 55-6
  • No additional mains connection required for cooling unit. Power supply to the Cool 50 MPW50 via the Microplasma
  • Alternatively, at high currents, duty cycles and ambient temperatures, a separate recooling unit can be used (the recooling unit does not fit under the Microplasma or on the Trolly 55-6)
  • Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
  • 3.5 m mains supply lead with 16 A shock-proof plug
  • Always read the information in the operating instructions of the relevant welding torch and welding machine before carrying out any welding.

Control:
  • Welding sequence selection and parameter setting using click wheel or conventional operation with sequence buttons (back/forward)
  • Expert menu for advanced welding parameter settings
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "New Items"?
Thank youYour Enquiry has been sent successfully.
© Ms Supertech Industrial Solutions. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.